Showing posts with label gas rc airplane. Show all posts
Showing posts with label gas rc airplane. Show all posts

Thursday, February 14, 2008

Kyosho F16 FIGHTING FALCON DF55 Electric RC Airplane ARF

Kyosho F16 FIGHTING FALCON DF55 Electric RC Airplane ARF  @ Hobby-eStore.com


Heralded as the real pilot's fighter jet, the F16 Fighting Falcon was designed to be small, fast and lethal without all the bells and whistles of much larger US fighters. The superior visibility from the cockpit, the advanced radar systems, and the close-range weapon systems make this the ideal fighter for air-to-air combat. Placed in service in January 1979, the Fighting Falcon still fights along side the F22 and F117 Air Force fighters today. This legendary aircraft is captured in scale detail and matching performance, as Kyosho's first DF55 brushless ducted fan RC jet.

The new DF55 is a brushless ducted fan unit with an impellor diameter of 55mm, which is 10mm larger than the popular DF45.It's installed in a hybrid foam fuselage that sets new standards for scale appearance and durability. The airframe can handle the higher loads that result from the exceptional performance of the bigger ducted fan while remaining incredibly light. The F16 is factory assembled with the brushless motor, micro servos and brushless speed control installed! All you need to do is install a LiPo battery pack and a receiver of your choice, and you're ready to fly one of the most high-performance ducted fan jets available.




Thursday, January 31, 2008

POWER-3D Nitro Gas RC Airplane ¨CKIT

POWER-3D Nitro Gas RC Airplane ¨CKIT  @ Hobby-eStore.com


63" Wingspan, 798 sq. in. wing area, about 66" Length, about 7-7.2 lbs. flying weight.


Thick, semi-symmetrical airfoil is great for aerobatics and slow landings. With its light weight the airplane is more responsive to the controls. Conventional built-up construction from precision laser cut parts. Cowl and wheel pants are pre-finished fiberglass. Landing gear is pre-finished aluminum. Airplane is a precision aerobatic performer; point rolls, knife-edges, snaps and rolls are performed with ease. 3D flight, hovering, torque rolls, waterfalls are all possible.

All parts are pre-cut and ready for assembly. Initial assembly is very easy and only takes a few hours. For 4 or more channels: Ailerons (2 servos), Elevator, Rudder and Throttle.